Ultimate Modelling Products Primer - 60ml Grey UMP030
SKU
UMP030
Out of stock
£6.29
Our Ultimate Primer is a water based acrylic polyurethane self levelling surface primer. Offering a simple and easy application with excellent adhesion and durability, it dries to a hard flat finish and is simple and easy to clean up.
Ultimate Primer can be applied with a brush, airbrush and sponge for use on styrene, plastics, resin, metals, woods and various other substrates. There are several colours to choose from: Grey, black, white, gloss black and pink.
Instructions for use...
Shake well before using
No thinning needed
Best applied with a 0.4 or larger needle
Spray at 20psi - 30psi
Spray light layers
Allow to dry 10 minutes between coats
Model is ready for paint after 30 minutes.
Allow 24 hours to fully cure
Always remember to close cap properly
Clean your airbrush immediately after use with Ultimate Airbrush Cleaner
Ultimate Primer can be applied with a brush, airbrush and sponge for use on styrene, plastics, resin, metals, woods and various other substrates. There are several colours to choose from: Grey, black, white, gloss black and pink.
Instructions for use...
Shake well before using
No thinning needed
Best applied with a 0.4 or larger needle
Spray at 20psi - 30psi
Spray light layers
Allow to dry 10 minutes between coats
Model is ready for paint after 30 minutes.
Allow 24 hours to fully cure
Always remember to close cap properly
Clean your airbrush immediately after use with Ultimate Airbrush Cleaner
Write Your Own Review
