Turnigy 5A-1S ESC a very small and light brushless speed controller which supports 1S (3.7-4.2v) lipo cell with built-in 0.5A/5v BEC output. Perfect for micro-heli and indoor flyers.
Features:
Microprocessor controlled
Extremely low resistance
3A continous(5A surge)
1S lipo cell or 3 cell NiMH/NiCAD
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
BEC: Max 0.5A (switching)
Low Voltage Cutoff: 3.0v
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Programmable current limiting(very sensitive/standard/insensitive/disable)
Programmable startup type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Apply to most of inrunner and outrunner brushless motors.
Safe power on arming program ensures motor will not accidentally turn on.
Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
Note: Programable with Turnigy monster programing card.
Spec.
Burst Current: 5A
Battery: 1 Cell Lipo / 3 cell Nixx
BEC: 5V/0.5A
Size: 25*13*5mm
Weight: 2g
We suggest customers to not program the esc with their Tx.
voltage: 3.0~4.2V
Cont. Current: 3ABurst Current: 5A
Battery: 1 Cell Lipo / 3 cell Nixx
BEC: 5V/0.5A
Size: 25*13*5mm
Weight: 2g
We suggest customers to not program the esc with their Tx.
Write Your Own Review
