Out of stock
Special Price
£57.95
Regular Price
£64.99
A highly advanced 'profile' style 3D model that is far, far more than just the usual foam sheet. The whole model is moulded in EPO foam for durability and minimal weight. This method of moulding leaves strength where it is needed and minimal foam where it is not. Unlike normal 'profile' models, the Venus 3D incorporates a special plastic nose moulding/motor mount to spread the shock of impacts to more of the structure. Just behind it is a special internal compartment for both the ESC and 2S Li-Po battery. The magnetic hatch renders them invisible during flight. What other profile style model offers that?
On the performance front, the Venus 3D delivers that in spades! The ultra slow speed performance is predictable and dramatic, thanks to the large aileron, elevator and rudder surface areas. The deep fuselage provides great lift for extended knife edge flight.
Wing side force generators are standard and drag brakes for the ailerons are supplied if you need/want them.
The durable nature of the construction makes the Venus 3D suitable for outdoor flying as well on calm days. You can really explore that 'over 1:1' power to weight ratio then!
The recommended servos provide the right amount of power combined with low weight to make the Venus 3D shine in the most dramatic aerobatic. The 9g servo needs a small adjustment to the foam aperture to allow fitment. 10 seconds with a sharp knife will have it sorted!!!
Just 1 hr and some foam-safe Cyano will have her ready for flight.
Specifications
Completion Level Almost Ready To Fly
Wingspan 828mm (32.6")
Length 970mm (38.2")
Weight 210-250g
Servos 2 x 6g plus 1 x 9g Required
Motor TechOne AT22016 1500kV Required
ESC 10-12A Brushless ESC Required
Battery 2S 7.4V 450mAh 25C Required
On the performance front, the Venus 3D delivers that in spades! The ultra slow speed performance is predictable and dramatic, thanks to the large aileron, elevator and rudder surface areas. The deep fuselage provides great lift for extended knife edge flight.
Wing side force generators are standard and drag brakes for the ailerons are supplied if you need/want them.
The durable nature of the construction makes the Venus 3D suitable for outdoor flying as well on calm days. You can really explore that 'over 1:1' power to weight ratio then!
The recommended servos provide the right amount of power combined with low weight to make the Venus 3D shine in the most dramatic aerobatic. The 9g servo needs a small adjustment to the foam aperture to allow fitment. 10 seconds with a sharp knife will have it sorted!!!
Just 1 hr and some foam-safe Cyano will have her ready for flight.
Specifications
Completion Level Almost Ready To Fly
Wingspan 828mm (32.6")
Length 970mm (38.2")
Weight 210-250g
Servos 2 x 6g plus 1 x 9g Required
Motor TechOne AT22016 1500kV Required
ESC 10-12A Brushless ESC Required
Battery 2S 7.4V 450mAh 25C Required
Write Your Own Review
