Out of stock
£129.99
Overview
ST Model Piper Cub EP ARTF
Following on from the Cessna 182, ST Models have now created this fabulous model of one of the all time favourite light aircraft, the Piper J-3 Cub.
Moulded in impact resistant EPO foam and with a superb semi-scale shape, this new Cub can be assembled in minutes, thanks to the factory installation of the motor, ESC, servos and cables. All you need is a receiver, transmitter and flight battery. From out of the box to in the air will be limited by how long it takes to charge a battery, assembly is that fast!
Scale details include moulded surface features in the foam and a clever sprung undercarriage. The powerful, brushless outrunner motor and 10A ESC give spritely power and great endurance from the recommended low cost 950mAh Impulse Li-Po battery.
Like all Cubs, this is not a model for beginners, but would make a good step up after a trainer.
Moulded in impact resistant EPO foam and with a superb semi-scale shape, this new Cub can be assembled in minutes, thanks to the factory installation of the motor, ESC, servos and cables. All you need is a receiver, transmitter and flight battery. From out of the box to in the air will be limited by how long it takes to charge a battery, assembly is that fast!
Scale details include moulded surface features in the foam and a clever sprung undercarriage. The powerful, brushless outrunner motor and 10A ESC give spritely power and great endurance from the recommended low cost 950mAh Impulse Li-Po battery.
Like all Cubs, this is not a model for beginners, but would make a good step up after a trainer.
Wingspan: 1210mm (47.6in)
Length: 835mm (32.9in)
Weight: 840g
Servos: 3 x Micro (Inc)
Radio System: 4 Channel Tx and Rx Required
Battery: Intellect 3S 1100/1300Mah 20C Li-Po
Wing Area: 21.5dm2
Wing Loading: 39g/dm2
S/C Rec: 10A Brushless (Inc)
Electric Motor: Brushless 1120kv Outrunner (Inc)
Write Your Own Review
