The MULTIcont BL-XX S-BEC controller series is designed for surface and helicopter models. By using a switching regulator BEC, up to 6 servos can be powered by up to 4S LiPo cells via the BEC of the controller. A separate receiver battery is no longer required. Extensive programming possibilities allow adaptation to a wide range of applications. Programming is even easier with the MULTIPLEX MULTImate # 8 2094.
Features:
Numerous programmable parameters Undervoltage cut-off for: LiPo or NiXX batteries Brake: ON or OFF Motor reversing: on or off Engine shutdown mode: Switch off engine power reduction or engine Motor start-up behavior: Soft or standard Timing: automatic or manual (7 degrees or 22-30 degrees) Clock frequency: 8 kHz or 16 kHz Model Type: Area Model or Helicopter (Governor Mode) With S-BEC = Battery Eliminator Circuit (BEC) Receiver power supply from the drive battery even with high cell numbers and large servo number Start safety system prevents unintentional start-up of the motor when the battery is plugged in Motor cut-off in case of massive radio interference or missing transmitter signal Automatic undervoltage shutdown with a new start-up (reset function) for LiPo and NiXX cells
Width: 25 mm
Height: 9 mm
Length: 42 mm
Weight: 0.043 Kg
Continuous current in A: 40
Clock frequency in kHz: 8/16
Cell count: 2-6 LiPo, 5-18 NiMH
BEC voltage in V: 5.5
BEC voltage in A: 2.5
Receiver Power Supply: Yes
Regulation: Forward
S-BEC: No.
Telemetry: No.