SebArt Mini BAe Hawk T1 V2 90mm 1.42m ARF (Military)
SKU
SEB-BH140-M
Out of stock
£970.00
Sebart fiberglass mini Jet with electric retracts, gear doors and corresponding servos and sequencer, as well as all accessories. Designed for 90mm EDF or P20-30N jet turbine.
The all new Mini BAe Hawk Jet ARF was designed by Italian aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design is based on real aircraft design and added the ultimate aerodynamically ideas of the modernst pattern models, using the 15 years experience in flying jets of Seba.... the result is surprising!
This innovative design combined with the lightweight structure, the fiberglass fuselage and all wood airframe wings and stabs, give the Mini MB-339 Jet ARF an impressive precision and smoothness at any airspeed and flight condition. Thanks of his low wingload and the powerfull 90mm EDF or the P20-K30 turbine, it can be a fantastic aerobatic jet-trainer... let you surprise from your new Mini BAe Hawk Jet ARF !
The all new Mini BAe Hawk Jet ARF was designed by Italian aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design is based on real aircraft design and added the ultimate aerodynamically ideas of the modernst pattern models, using the 15 years experience in flying jets of Seba.... the result is surprising!
This innovative design combined with the lightweight structure, the fiberglass fuselage and all wood airframe wings and stabs, give the Mini MB-339 Jet ARF an impressive precision and smoothness at any airspeed and flight condition. Thanks of his low wingload and the powerfull 90mm EDF or the P20-K30 turbine, it can be a fantastic aerobatic jet-trainer... let you surprise from your new Mini BAe Hawk Jet ARF !
Features
Painted fiberglass fuselage
Wing Span: 1420mm / 55.9in
Length: 1400mm / 57.08in
Wing area: 32dm² / 496sqin
Weight (without battery): 3kg / 105.82oz
Flying weight: 3.85kg / 135.80oz
Wings and stabilizers in balsa covered with Oracover
Retract aluminium landing gear + doors installed
Includes
SebArt Mini BAe Hawk T1 1,42m
2x servos 12g for electric retract landing gear with doors sequencer (included)
1x servo 12g for front steering landing gear (included)
Manual in English
Requires
1x 90mm EDF and motor
1x ESC
Minimum 6 channels radio and receiver
7x sub micro servos 17g (1x rudder, 2x elevator, 2x ailerons, 2x flaps)
5000-5800 mAh 35-50c Lipo Battery 6 cells
Lipo Battery Charger 6 cells
Estimated build time is 16 hours
Write Your Own Review
