Available
£204.99
Overview
Intermediate/advanced sport flyer
Description
Prepare to be completely bowled over!
So smooth, so bewitching and such irresistible joy to fly, the new laser-cut Seagull PT19 is even tastier than the original classic from a few years back. Includes two ready-painted pilots, engine mount, vinyl decal sheet and all the usual factory-finished Seagull features and fantastic fittings kit.
What a painless, practical way to transition from a high wing trainer to a low wing scale model!
Wing area: 604.5sq.ins (39.00 sq.dm)
Wingspan: 61.4ins (156cm)
Length: 46ins (117cm)
Approx flying weight: 5.7-6.4lb (2.6-2.9kg)
Factory covered with Oracover
ITEMS REQUIRED TO COMPLETE MODEL
Requires: 4 channel RC with 6 servos
Requires 46-52 2-stroke. or 52 4-Stroke
Glow plug to suit engine.
Propeller to suit engine.
Protective foam rubber for radio
system.
Silicone fuel line.
Stick-on weights for balance
(If necessary).
SUGGESTED LIST OF TOOLS & SUPPLIES
-Thick cyanoacrylate glue.
- 30 minute epoxy.
- 6 minute epoxy.
- Hand or electric drill.
- Assorted drill bits.
- Modelling knife.
- Straight edge ruler.
- 2mm ball driver.
- Phillips head screwdriver.
- 220 grit sandpaper.
- 90° square or builder’s triangle.
- Wire cutters.
- Masking tape & T-pins.
- Thread-lock
Write Your Own Review
