Multiplex MS-X3-Servo #6 (5135)
Not suitable for 6 Volt operation! Always mount the servo using the rubber grommets supplied, otherwise vibration may result in rapid wear or early failure.
Always install the servo in the model so that the push-rods are aligned in parallel with the long sides of the case,
Not suitable for 6 Volt operation! Always mount the servo using the rubber grommets supplied, otherwise vibration may result in rapid wear or early failure.
Always install the servo in the model so that the push-rods are aligned in parallel with the long sides of the case,
Dim. app - 27x12,7x22,4 mm
Weight app. 13 g / 0.46 oz
Torque app. 15,7 Ncm / 22 oz-in
Speed app. / Temps env. (4,8V) 0,08 s / 40o
Write Your Own Review
