Out of stock
£33.00
The Swift II is a must-have, almost indestructible, fun aircraft from the MS Composit range of flying wings. Made from EPP (Extruded Poly-Propylene), the design features make this model quick to assemble, extremely light, stable in flight and highly resistant to physical damage. This makes it a suitable choice for beginners.
For the more experienced flier, the Swift II may be tuned to expand the flight envelope making it a high-performance, agile model capable of advanced aerobatics.
We found the build to be quick and easy. We used standard CA and activator but you could use 5-minute epoxy. The wing is supplied in two halves with two winglets. The kit requires two 9g servos set up as elevons using the pre-programmed delta mix or v-mix (ail and elevator channels) available on most modern programmable transmitters. Control rods, horns and pushrod connectors are supplied together with a plastic motor mount.
Features:
* Robust EPP construction resistant to crash damage
* Rearward facing motor in pusher mode less prone to damage
* Easy to hand-launch by the wing tip
* Bright airbrushed colour scheme
* Requires assembly but is very quick build
Specification:
* Wingspan: 810mm/31.9in
* Length: 520mm/20.47in
* Approx flying weight: 300g / 10.6oz
* RC functions: min 3-channel - aileron/elevator (mix), throttle
Kit Contents:
* 4-piece wing with pre-hinged flying surfaces
* Hardware accessory pack (includes motor mount)
* Illustrated step-by-step assembly instructions
Additional items required:
* Brushless motor (around 180W)
* Brushless ESC
* Prop and prop adaptor
* Servos: Two x 9g
* Battery: 1300 to 1800 mAh 3S (11.1V) LiPo
* RC System: min 3-channel TX/RX with delta-mix
* Glassweave covering & reinforcing tape 25mm
* CA glue and activator (optional)
Write Your Own Review
