Out of stock
£73.00
Overview
Microaces Scrappee NiteOwl Kit - With LED Lights
If you're looking to extend your flying time well into the evening and beyond, the Scrappee NiteOwl is a high fun factor, easy flying, low cost way to enjoy illuminating micro RC in the dark.
Based on the Scrappee Patriot II airframe, with a destinctive night time colour scheme and the NEW Microaces LED Lighting Kit included, the NiteOwl is a whole lot of fun when the rest of the fleet is grounded due to fading light.
An easy, quick build kit that's also tough AND repairable.
A plug and play, easy install LED system compatible with AIO receivers.
An ideal platform for experiencing micro RC in the dark.
A great way to extend flying times into the evening
This is a kit that's not only for the beginner, but also for anyone with a sense of fun and adventure who wants to enjoy all aspects of model RC flying.
NOTE: To get your Scrappee in the air you will need an RC transmitter (compatible with one of the 4 types of receiver available) plus a suitable battery and charger. Please feel free to CONTACT US if you need some guidance!
Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
DSM2/X Compat. S-FHSS Compat. FrSky D8 Compat. FrSky D16 Compat. (NOT INCLUDED)
Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Airframe Sport
Controls Rudder, Elevator, Throttle
Length 330mm / 13"
Wingspan 430mm / 17.0"
Wing Area 3.68 sq dm / 57 sq in.
Flying Weight. 39 - 42g/1.4 - 1.5oz
Wing Load ~10.8 g/sq.dm / 3.5 oz/sq.ft.
Rec.
Receiver
Microaces AIO 5 Channel Receiver (NOT INCLUDED)
Motor / G.Box* (Included)
Microaces Motor Gearbox with STANDARD prop shaft
Rec. Prop* GWS 4530
Skill Level - Build Beginner
Skill Level - Pilot Beginner
Tools required
Scalpel, 180 Grit sandpaper or stick (NOT INCLUDED)
straight edge, tweezers (NOT INCLUDED)
Adhesive Deluxe Materials Foam2Foam (NOT INCLUDED)
Based on the Scrappee Patriot II airframe, with a destinctive night time colour scheme and the NEW Microaces LED Lighting Kit included, the NiteOwl is a whole lot of fun when the rest of the fleet is grounded due to fading light.
An easy, quick build kit that's also tough AND repairable.
A plug and play, easy install LED system compatible with AIO receivers.
An ideal platform for experiencing micro RC in the dark.
A great way to extend flying times into the evening
This is a kit that's not only for the beginner, but also for anyone with a sense of fun and adventure who wants to enjoy all aspects of model RC flying.
NOTE: To get your Scrappee in the air you will need an RC transmitter (compatible with one of the 4 types of receiver available) plus a suitable battery and charger. Please feel free to CONTACT US if you need some guidance!
Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
DSM2/X Compat. S-FHSS Compat. FrSky D8 Compat. FrSky D16 Compat. (NOT INCLUDED)
Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Airframe Sport
Controls Rudder, Elevator, Throttle
Length 330mm / 13"
Wingspan 430mm / 17.0"
Wing Area 3.68 sq dm / 57 sq in.
Flying Weight. 39 - 42g/1.4 - 1.5oz
Wing Load ~10.8 g/sq.dm / 3.5 oz/sq.ft.
Rec.
Receiver
Microaces AIO 5 Channel Receiver (NOT INCLUDED)
Motor / G.Box* (Included)
Microaces Motor Gearbox with STANDARD prop shaft
Rec. Prop* GWS 4530
Skill Level - Build Beginner
Skill Level - Pilot Beginner
Tools required
Scalpel, 180 Grit sandpaper or stick (NOT INCLUDED)
straight edge, tweezers (NOT INCLUDED)
Adhesive Deluxe Materials Foam2Foam (NOT INCLUDED)
NOW INCLUDES Brushed Motor/Gearbox with standard prop shaft
GWS 4530 Prop and rubber prop adapter
Microaces LED Lighting Kit A
SHEET PARTS 2mm laser cut Depron Airframe sheet
1mm printed & laser cut Depron fuselage sheet
1mm printed & laser cut Depron flight surfaces sheet x 2
200 micron printed & laser cut polypropylene sheet
polyester sticker sheet
LOOSE PARTS 0.8mm laser cut plywood motor mount
Two 30mm Ø Sponge rubber tires + 3D printed hub assembly
Four 3mm & two 4mm Ø noedymium magnets
2mm Ø carbon fibre rod axle
pre-shaped piano wire elevator & rudder control rods
Microaces Motor Gearbox with STANDARD prop shaft
Prop* GWS 4530
Skill Level - Build Beginner
Skill Level - Pilot Beginner
Tools required
Tools required Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers (NOT INCLUDED)
Required. Adhesive Foam2Foam / Foam safe CA / Aliphatic glue (NOT INCLUDED)
Write Your Own Review
