Microaces LED Lighting Kit B

Whether you want to fly late into the calm evenings or would like to further enhance your scale project, the Microaces LED Lighting Packs gives you many options to add LED lights to your model.


KIT B

LED Control Unit
2 x Red LED
1 x Green LED
2 x White LED
1 x LED Y Cable

LED Control Unit

The LED Control Unit (LCU) has 4 standard LED ports, 2 RGB LED ports and a connector to allow the unit to be programmed from PC*.

The LCU plugs into any spare port (JST-SH) on your receiver. You then need to configure that port to a 3 way switch within your transmitter settings. The LCU with all connectors weighs 1.6g

LED Lights

Available in Red, Green or White, the small 3mm diameter bulb shaped LED provides a bright, clear and very visible light. All LEDs come with connector to the LCU and a 320mm long, lightweight cable. Each LED light with cable & connector weighs 0.6g.

LED Y Cable (inc. in Kit B)

Using the LED Y cable, you can run 2 LEDs from one port if requried. There are also extension cables available to get the lights to where you need them. The LED Y cable with all connectors weighs 0.4g