Out of stock
£208.95
Overview
PNP Riot V2 ARTF Model
The incredible new Max-Thrust Riot is the perfect all-rounder. With reduced control throws it's smooth, stable and remarkably easy to fly for the novice or beginner. Increase those throws and the Riot more than lives up to its name thrilling the most ambitious aerobatic pilot.
Featuring durable "EPOFLEXY" construction throughout, the superbly moulded airframe is not only very light and stiff, it's extremely tough too. It's ideal for operating from "less than perfect" flying strips, resisting hangar rash and those inevitable bumps. And to keep you flying there will be full spares support available.
Bright Wing Tip LEDs
Decals Pre-Applied
Durable EPOFLEXY Construction
Powerful Ballraced Brushless Motor
40A Brushless ESC
Aircraft Grade Aluminium Undercarriage
Quick Assembly - No Glue Required
Upgraded battery compartment now with hook and loop to fasten pack in place
Battery cover has additional locking clip
Upgraded tail wheel bracket
In the Plug and Play version of the Riot, all 4 servos - upgraded - (2x 9g, 2x 17g) are included and pre-installed, the 40A brushless ESC and 850kv Outrunner motor are ready mounted. The wing tip LEDs are pre-installed with wiring run to the wing root and plug in to any spare channel in the receove being used.
To have this model flight ready you will need a transmitter and receiver (4 channels or more), a Li-Po flight battery (2200mAh 11.1v) and a compatible charger.
Featuring durable "EPOFLEXY" construction throughout, the superbly moulded airframe is not only very light and stiff, it's extremely tough too. It's ideal for operating from "less than perfect" flying strips, resisting hangar rash and those inevitable bumps. And to keep you flying there will be full spares support available.
Bright Wing Tip LEDs
Decals Pre-Applied
Durable EPOFLEXY Construction
Powerful Ballraced Brushless Motor
40A Brushless ESC
Aircraft Grade Aluminium Undercarriage
Quick Assembly - No Glue Required
Upgraded battery compartment now with hook and loop to fasten pack in place
Battery cover has additional locking clip
Upgraded tail wheel bracket
In the Plug and Play version of the Riot, all 4 servos - upgraded - (2x 9g, 2x 17g) are included and pre-installed, the 40A brushless ESC and 850kv Outrunner motor are ready mounted. The wing tip LEDs are pre-installed with wiring run to the wing root and plug in to any spare channel in the receove being used.
To have this model flight ready you will need a transmitter and receiver (4 channels or more), a Li-Po flight battery (2200mAh 11.1v) and a compatible charger.
Wingspan 1400mm (55.1")
Length 1130mm (44.5")
Flying Weight 1350g (47.6oz)
Servo 9g x 2, 17g x 2
Recommended Battery 11.1v 2200mAh with deans style connector (not included)
Suitable charger required
Recommend minimum 4 channel Transmitter and Receiver required
Write Your Own Review
