Out of stock
Only 1 left
£59.50
For all you (would be) woodies, here is the JIMMY !
A traditional trainer built in a traditional way, from balsa and plywood parts.
Additional building information on build can be down loaded on line (details shwon on plan where to log in). this can become your very first kit build.
Or just be an enjoyable project for the experienced builder.
Easy to fly, but a bundle of fun with the throttle wide open. Capable of most 2-axis aerobatics.
And stable too, recover from any awkward situation by just closing the throttle and let go of the sticks.
The plane will sort itself out in a very short time, ready to resume normal flying.
Eminently suited for club or school projects.
Design Features:
All Formers And Ribs CNC Cut
Unique Tab Lock Design
Two Piece Design Easy transportation
Motor/Battery compartment Easy accesable
Battery Acces Through hatch opening
Kit Includes:
Full Size Rolled Cad Plans With All Parts Shown
Control Horns , Steering Cables,
Wire U/C
Required to Complete:(Not Included)
RadioLink TF8B * channel radio combo
MG90S Micro Metal Gear servo with control horns (Tower Pro) SMC-SV404 (x2)
Tornado Thumper V3 2826/18 1000KV SKU2975
Overlander XP2 20A Brushless ESC - RTF - SKU 2725 SKU2725
Overlander 3s 900mAh Lipo - SKU2559 (or similar)
APC 7 x 4 Slow fly electric prop. APCLP07040SF
VSR-Mini 6A 60W AC Charger SKU3249
Aliphatic Resin 112g by Deluxe (AD8) S-SE09
SMC Cyanotec 5 Minute Epoxy Ultra Clear 25ml PC32
Plastic Headed Modeling Pins Assorted Colours 40 Pins Per Reel SMC-Pin
Oralight Covering - 1 or 2 rolls depending on colour choice
Note that unbent steel wire in the kit is for the landing gear
Grass or concrete airfield.
The Jimmy is Easy Flying,
Building is easy with in a small space.
A traditional trainer built in a traditional way, from balsa and plywood parts.
Additional building information on build can be down loaded on line (details shwon on plan where to log in). this can become your very first kit build.
Or just be an enjoyable project for the experienced builder.
Easy to fly, but a bundle of fun with the throttle wide open. Capable of most 2-axis aerobatics.
And stable too, recover from any awkward situation by just closing the throttle and let go of the sticks.
The plane will sort itself out in a very short time, ready to resume normal flying.
Eminently suited for club or school projects.
Design Features:
All Formers And Ribs CNC Cut
Unique Tab Lock Design
Two Piece Design Easy transportation
Motor/Battery compartment Easy accesable
Battery Acces Through hatch opening
Kit Includes:
Full Size Rolled Cad Plans With All Parts Shown
Control Horns , Steering Cables,
Wire U/C
Required to Complete:(Not Included)
RadioLink TF8B * channel radio combo
MG90S Micro Metal Gear servo with control horns (Tower Pro) SMC-SV404 (x2)
Tornado Thumper V3 2826/18 1000KV SKU2975
Overlander XP2 20A Brushless ESC - RTF - SKU 2725 SKU2725
Overlander 3s 900mAh Lipo - SKU2559 (or similar)
APC 7 x 4 Slow fly electric prop. APCLP07040SF
VSR-Mini 6A 60W AC Charger SKU3249
Aliphatic Resin 112g by Deluxe (AD8) S-SE09
SMC Cyanotec 5 Minute Epoxy Ultra Clear 25ml PC32
Plastic Headed Modeling Pins Assorted Colours 40 Pins Per Reel SMC-Pin
Oralight Covering - 1 or 2 rolls depending on colour choice
Note that unbent steel wire in the kit is for the landing gear
Grass or concrete airfield.
The Jimmy is Easy Flying,
Building is easy with in a small space.
Wing Area: 16 dm2
Wing Span; 1000 mm
Flying Weight: Starts at 465 grams
Wing Loading: 29gr dm2
3 Channel Controls (Thottle, Rudder and Elevator)
Write Your Own Review
