FrSKY S6R Receiver with SKT USB Programmer

SKU
FrSkyRX6PRO
Out of stock
£49.99

Description

6 Channel Receiver 3 axis Stabilization

Features

  • Built-in a three-axis gyro and three-axis accelerometer sensor module
  • Built-in RSSI PWM output (0~3.3V) on board
  • Built-in battery voltage sensor
  • Smart Port enabled

Specifications

  • Compatibility: FrSky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode. S6R-EU only works with Horus X12S and Taranis X9D Plus/X9E-EU/XJT-EU in D16-EU mode
  • Model:S6R(6CH receiver with built-in 3-axis gyro and 3-axis acceleration)
  • Dimension: 47.42*23.84*14.7mm(L*W*H)
  • Weight: 12.1g
  • Operating Range: full range
  • Operating Voltage Range: 4.0~10V
  • Operating Current: 100mA@5V
  • Number of Channels: 6CH?1~6CH from conventional channel outputs?
  • Measurement Range: +/-4g

Also SKT USB Programmer

Frsky SKT USB cable for programming the GPS and Accelerometer functions on the S6R and S8R receivers. Also can be used for updating Smart Port products

Description:

S.Port 1 (upper) - Monitor, receive and set the telemetry data for S6R (with DIP switch to the upper side)

S.Port 2 (down) - Upgrade S.Port products (with DIP switch to the down side)

How to upgrade S.Port products

Steps: Put the DIP switch to the down side ? connect the USB port of STK to the USB port of PC ? run frsky_update_Sport.exe", match the COM port number to the one assigned by PC. Click "File" button and select FW version ? connect the 3-wire S.Port cable to the S.Port 2 of STK and S.Port of upgraded product ? After "device found, please click Download", then click the "Download" button to start the upgrade ? Exit the process by clicking "End" button after "Firmware is updated".

Refer to S6R manual from FrSky website download section for how to monitor, receive and set the telemetry data: https://www.frsky-rc.com/s6r/

"
Write Your Own Review
You're reviewing:FrSKY S6R Receiver with SKT USB Programmer
Your Rating