Suitable for Bending Round Brass, Aluminium & Copper Tubes & Rods up to 6mm Diameter
STEP 1:
Fully open the tool & place the rod or tube to be bent in position. Ensure that the top surface of the tube or rod aligns with the support
STEP 2:
Make the bend to the desired angle. Aligning the 1st mark with the mark on the top handle will give a 45o bend.
STEP 3:
Aligning the 2nd mark with the mark on the top handle will give a 90o bend.Suitable for Bending Round Brass,
Aluminium & Copper Tubes & Rods up to 6mm Diameter
STEP 1:
Fully open the tool & place the rod or tube to be bent in position. Ensure that the top surface of the tube or rod aligns with the support
STEP 2:
Make the bend to the desired angle. Aligning the 1st mark with the mark on the top handle will give a 45o bend.
STEP 3:
Aligning the 2nd mark with the mark on the top handle will give a 90o bend
STEP 1:
Fully open the tool & place the rod or tube to be bent in position. Ensure that the top surface of the tube or rod aligns with the support
STEP 2:
Make the bend to the desired angle. Aligning the 1st mark with the mark on the top handle will give a 45o bend.
STEP 3:
Aligning the 2nd mark with the mark on the top handle will give a 90o bend.Suitable for Bending Round Brass,
Aluminium & Copper Tubes & Rods up to 6mm Diameter
STEP 1:
Fully open the tool & place the rod or tube to be bent in position. Ensure that the top surface of the tube or rod aligns with the support
STEP 2:
Make the bend to the desired angle. Aligning the 1st mark with the mark on the top handle will give a 45o bend.
STEP 3:
Aligning the 2nd mark with the mark on the top handle will give a 90o bend
Write Your Own Review
