E Flite 30A Pro SB Brushless ESC (Coated) V2 offers up to 30 amps of continuous current with proper airflow and a peak of 35 amps. It drives up to 5 analog or 4 digital sub-micro servos with the BEC on any recommended input voltage. This brushless ESC includes programmable motor braking, soft start for helis and planes, timing, throttle input range, and low-voltage cutoff. It also features auto motor shutdown in case of lost signal or interference. The safe power-arm mode prevents accidental starts.Up to 30-amp continuous current with proper airflow, 35-amp peak5-volt Switch-Mode BEC circuit capable of 700mAh continuous current on any recommended input voltageDrives up to 5 analog or 4 digital sub-micro servos with the BEC3S-4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltageProgrammable motor brakingSafe power-arm mode prevents accidental startsProgrammable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltageProgrammable soft start for helis and airplanesAuto motor shutdown if signal is lost or there is interferenceProgrammable timing - 5 user-selectable ranges for use with a larger variety of brushless motorsHeli mode for starting the motor with a low speed ratioPre-wired connectors - E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads
