Out of stock
Only 1 left
£5.50
Becc Red Cross A5Multi 5 - 50mm
- Instructions
- Vinyl Self Adhesive Decals
- Remove any dust or grease from the surface to receive the vinyl prior to application
- Carefully peel off the vinyl from the backing sheet from the corner and apply to the surface with gentle pressure. With larger decals, it will help to wet the surface of the model which will allow time to position correctly and enable air trapped beneath the vinyl to escape.
- If the vinyl is cold it may appear stiff. heat gently with a hari dryer to soften the vinyl. This will improve the adhesive qualities and allow the decal to be moulded onto irregualr surfaces.
- When happy with the layout apply medium pressure with fingers. the adhesive will reach full strength in 24 hours and will be suitable for external use. It is not necessery to over coat the vinyl, but applications of any normal varnish will blend the edges of the decal into the surface and provide a uniform appearance.
- To remove unwanted vinyl, warm the vinyl and peel carefully, then remove the adhesive residue with white spirit.
Write Your Own Review
