Vinyl Lettering is supplied in sheet form with the characters and symbols computer cut from a flexible vinyl film with a waxed backing sheet and the surplus film in place to prevent the letters becoming loose. Characters are removed from the backing sheet and applied direct to the model. The permanent adhesive ensures the letters remain in place without any additional treatment although they will withstand overcoating with all standard varnishes and sealers.
The sets are supplied with full colour instructions to help in positioning. The letters can be applied to almost any substrate as long as it is clean and free from dust. Being only 70 microns thick, they conform easily to uneven surfaces and can be moulded further with the application of mild heat, from a hair dryer for example.
The standard letter height sizes of 2mm, 3mm,4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm and 25mm. There are approximately 400 characters, with a minimum of 4 characters for the less used letters and up to 10 of the most used characters per sheet
