Available
£149.95
Overview
On Board Starter unit-suits DLE30 and DLE35RA engines
AUTO STARTER KIT FOR EME35,DLE30,DLE35RA
A very robust and strong auto start kit for 30-35cc gas engines. Amaze your friends and fellow pilots by starting your big gas engine just by a flick of a switch on your transmitter and not by a flick of the propeller. The kit incorporates a special one way bearing so power is not transferred back to the electric motor when the engine starts.The auto start unit will require an auto start switch and a battery, 6-15v (12v is recommended) and leads have to be soldered to the motor.
ASSEMBLY IS REQUIRED, you will need to remove your propeller hub and shaft and install the gear with the one way bearing, you need to be comfortable taking an engine apart as no instructions are included.
Please note: Grease your gears after assembly. DO NOT operate without a prop.
Compatible with the following engines: EME35, DLE30, DLE35RA plus similar engines (Note that the DLE55RA requires drilling one new mounting hole).
Features:
Strong and robust
Beautifully engineered
Fitted with a powerful brushed 480 motor
Strong one way bearing
Supplied with necessary mounting hardware
A very robust and strong auto start kit for 30-35cc gas engines. Amaze your friends and fellow pilots by starting your big gas engine just by a flick of a switch on your transmitter and not by a flick of the propeller. The kit incorporates a special one way bearing so power is not transferred back to the electric motor when the engine starts.The auto start unit will require an auto start switch and a battery, 6-15v (12v is recommended) and leads have to be soldered to the motor.
ASSEMBLY IS REQUIRED, you will need to remove your propeller hub and shaft and install the gear with the one way bearing, you need to be comfortable taking an engine apart as no instructions are included.
Please note: Grease your gears after assembly. DO NOT operate without a prop.
Compatible with the following engines: EME35, DLE30, DLE35RA plus similar engines (Note that the DLE55RA requires drilling one new mounting hole).
Features:
Strong and robust
Beautifully engineered
Fitted with a powerful brushed 480 motor
Strong one way bearing
Supplied with necessary mounting hardware
Voltage: 3~15V (3-cell lipo recommended)
Suits Engines: 30~35cc
Weight: 560g
Write Your Own Review
