To complete you will also need transmitter, Microaces AIO 5 Channel Receiver to match your Tx, battery and charger, adhesives etc.
History in the Making - Flown by Major John Ingis Gilmour 1918
Microaces love of aviation history ensures that the aircraft we reproduce as kits look fantastic on static display as well as in the air.
The kit is no exception, and replicates one of the most famous Camels of WWI. On the 21st of April 1918, Canadian Ace, Roy Brown made an attack on the Red Baron's triplane whilst it was attacking one of his fellow pilots. Manfred von Richthofen crashed shortly after and Brown was credited with his death. The facts of the incident have been a source of much research and it is suspected that ground fire played a vital role too.
Included in this multi-media model is a vac-formed cowl, free spinning 3D printed fuel pump prop and rigging part PLUS a spinning dummy rotary engine kit. All these extras add an incredible level of mechanical and visual detail to this astounding model.
This Microaces kit is now supplied 'as standard' with the most suitable Microaces motor/gearbox and propeller combination for the model.
So to complete the kit for radio controlled flight, all you need is an All In One (AIO) Receiver that's compatible with your transmitter. Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver (NOT INCLUDED)is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order. DSM2/X Compat. S-FHSS Compat. FrSky D8 Compat. FrSky D16 Compat.
Kit Content
INCLUDES Brushed Motor/Gearbox with long prop shaft GWS 4530 Prop and rubber prop adapter SHEET PARTS
200 micron printed & laser cut polypropylene sheet polyester sticker sheet 0.8mm plywood parts sheet Full Colour Printed Assembly Guide
LOOSE PARTS Two 30mm dia neoprene rubber tires Vacuum formed scale cowl
10mm brass sleeve for rotary engine
3D printed fuel pump prop and rigging detail Two 4mm dia noedymium magnets 100mm x 6mm dia plastic tube 200mm x 5mm dia plastic tube 1mm x 0.4mm carbon fibre strip 1mm dia carbon fibre rod Rigging wire
pre-shaped piano wire elevator & rudder control rods
Devil in the Detail
There is also an additional Detail Packs available for this model.
A pack containing four 3D printed 50lb Cooper bombs plus ply and laser cut plastic parts that assemble to replicate the bomb rack, creating an extra-ordinary level of detail never seen in an RC kit of this scale before.
3D Printed Pilots
A fantastic enhancement to the kit, that really upgrades the level of realism is a 3 dimensional pilot.
Microaces AIO 5 Channel Receiver (Not Included)
Microaces Motor Gearbox with LONG prop shaft Rec. Prop* GWS 4530 Skill Level - Build Intermediate Skill Level - Pilot Intermediate Tools required Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers Rec. Adhesive Deluxe Materials Foam2Foam / Aliphatic glue
*Now included in the kit Kit Content NOW INCLUDES Brushed Motor/Gearbox with long prop shaft GWS 4530 Prop and rubber prop adapter SHEET PARTS
200 micron printed & laser cut polypropylene sheet polyester sticker sheet 0.8mm plywood parts sheet Full Colour Printed Assembly Guide
LOOSE PARTS Two 30mm dia neoprene rubber tires Vacuum formed scale cowl
10mm brass sleeve for rotary engine
3D printed fuel pump prop and rigging detail Two 4mm dia noedymium magnets 100mm x 6mm dia plastic tube 200mm x 5mm dia plastic tube 1mm x 0.4mm carbon fibre strip 1mm dia carbon fibre rod Rigging wire
pre-shaped piano wire elevator & rudder control rods
Video Assembly Guide
Click on booklet to view online!
To complete you will also need transmitter, Microaces AIO 5 Channel Receiver to match your Tx, battery and charger
