From now on it means: 'Let's get ready for airrace!" - PLEASE NOTE A GRAUPNER HOTT TRANSMITTER IS REQUIRED (ALTERNATIVELY A DIFFERENT TX/RX CAN BE USED)
The new ALPHA250 is a pure-breed FPV Race Quadrocopter for the fly with video glasses from the 'i' perspective. Equipped with FPV camera you can experience the flight experience as on the simulator or in the real aircraft. The fpv racing with Quadrocopters occurs are increasing in popularity. In this way,' Racing Tracks layouts with gates, flags or even pipes created the lodges. Or it can be a certain distance to trees with corridors. The chassis of the ALPHA 250 is made exclusively from carbon fiber, which is extremely stiff and insensitive. The double floor allows the installation of the 4 Brushless regulator, as well as the store uberlanger cable, what a tidy impression. An ideal supplement for this purpose, the use of the Gyro Receiver GR-18, which are already in a full-fledged Flight Control for flight position stabilisation. Thus, at an additional board, including additional cables be dispensed with. Only the servo cable of the 4 brushless controller in the gyro receivers and this does the rest. Via the telemetry menu of the HoTT-transmitter is then the complete setup of the gyro receiver possible. In addition, it is possible the sensitivity of the flight control via the receiver telemetry menus of the GR-18 very easily to your own needs. Due to the easy handling the model is also suitable for less experienced pilots.
Highlights & Details
Chassis made of carbon fiber Perfect for Quadrocopter Race designed
Facts
80-100 km/h with original features and 3S LiPo Very stable Modular, so that in the event of a crash, only individual parts are required Chassis and arms made of carbon fiber Cultivate carbon fiber material with anodised Alubolzen Extremely precise flight control Flight control integrated in the receiver Software made in Germany Very direct and precise flight behavior by eliminating additional transmission paths All settings via HoTT-transmitter can be done Lampwork 2300 KV Brushless external rotor motors with special multiple winding and optimized cooling Simplified entry in the fpv racing by position mode or professional FPV racing on the yaw rate mode Clean impression by double bottom for storing the regulator and the cable No slant of the motors in order to avoid air turbulence of the rear propeller Self secure propeller recordings LED Lighting Stiffer props with extremely good efficiency and flight behavior tuned for FPV Racing Universal design for the use of FPV camera with and without Action Cam Elaborate design for optimized mounting of components.
Inclusded:
Racing Quadcopters 2 ultra-Brushless Motors2804 2300 KV with right-handed thread 2 ultra-Brushless Motors2804 2300 KV with left thread 2 propeller red (R/L) 2 propeller white (R/L) 4 Ultra brushless controller GR-18 with copter software pre-set Fixings User manual.